Synthetic membrane in PVC-P to line the inside of pools.
SOPREMAPOOL 3D is a synthetic membrane in PVC-P to line the inside of pools, reinforced with polyester mesh, with nominal thickness 1.5 mm (Spirit Ceram) and 1.8 mm (Sensitive) with decorative relief finish. Synthetic membrane obtained by coating in compliance with European Standard EN 15836-2 (2010).
• Newly built or existing pools;
• On concrete, cement, masonry, prefabricated steel panel substrates;
• On non-compatible substrates (resins, polystyrene panels, etc.), the special Soprema geotextile separation layer must be laid;
• The pool water temperature must never exceed 32 °C.
SOPREMAPOOL 3D membranes must be laid using a hot air blower, such as that produced by Leister. For proper welding, the edges must be clean and dry. For more information contact the Soprema technical department: email@example.com
When cleaning the SOPREMAPOOL 3D membrane, do not use aggressive products that may damage the surface and remove the decorative finish. It is recommended to start off using soapy water, avoiding abrasive products.
Proper water treatment must be guaranteed for the entire service life of the Sopremapool membrane. For more information contact the Soprema technical department: firstname.lastname@example.org
The SOPREMAPOOL 3D membrane is delivered in rolls placed on wooden pallets, separated and externally wrapped with polyethylene sheets. The rolls must be stored horizontally in their original packaging in a dry and temperate place (10-30 ° C). The rolls must be protected against humidity and weathering (sun, rain etc.)
Spirit Ceram: Grey and Light Blue
Sensitive: Sand, White, Grey, Black, Bali Sand, Bali, Bali XL, Wood. See the SOPREMAPOOL brochure for the up-to-date list.