SOPREMAPOOL PREMIUM

DESCRIPTION
SOPREMAPOOL PREMIUM is a synthetic membrane in PVC-P to line the inside of pools, reinforced with polyester mesh, with nominal thickness 1.5 mm and with a special surface lacquer. Synthetic membrane obtained by coating in compliance with European Standard EN 15836-2 (2010).

APPLICATIONS
• Newly built or existing pools;
• On concrete, cement, masonry, prefabricated steel panel substrates;
• On non-compatible substrates (resins, polystyrene panels, etc.), the special Soprema geotextile separation layer must be laid;
• The pool water temperature must never exceed 32 °C.

INSTALLATION
SOPREMAPOOL PREMIUM membranes must be laid using a hot air blower, such as that produced by Leister. For proper welding, the edges must be clean and dry.
For more information contact the Soprema technical department: tech-office@soprema.it


CLEANLINESS
When cleaning the SOPREMAPOOL PREMIUM membrane, do not use aggressive products that may damage the surface and the lacquered finish. It is recommended to start off using soapy water, avoiding abrasive products.
Proper water treatment must be guaranteed for the entire service life of the Sopremapool membrane. For more information contact the Soprema technical department: tech-office@soprema.it


STORAGE
The SOPREMAPOOL PREMIUM membrane is delivered in rolls placed on wooden pallets, separated and externally wrapped with polyethylene sheets. The rolls must be stored horizontally in their original packaging in a dry and temperate place (10-30 ° C). The rolls must be protected against humidity and weathering (sun, rain etc.)

COLOURS
Light Blue, Blue, Dark Blue, Musk Green, Sand, White, Light Grey, Cement Grey, Basalt Grey, Black. See the SOPREMAPOOL brochure for the up-to-date list.